APM Power Module with XT60 Connectors Kit

Chris Samperisi -

Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.

<h4Specifications:

  • Max input voltage: 18V
  • Min input voltage: 4.5 V
  • Max current sensing: 90A with APM, 60A with Pixhawk
  • Voltage and current measurement configured for 5V ADC
  • Switching regulator outputs 5.3V and 2.25A max
  • 6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector

Documentation:

Comments