Uploading design and engineering files to Site Scan Manager

3DR Support -

Comparing high quality, accurately georeferenced Site Scan orthomosaics with design and engineering files lets you easily identify as-built deviations and identify potential rework requests. Georeferenced design files can be uploaded directly into Site Scan Manager for comparison or our Success Services team is ready and waiting translate any CAD files into your local coordinate system.

To generate impactful overlays, follow the directions below.

  1. Open the "Project Data" tab. If you have a georeferenced file from your GIS department in a zipped .shp, .kml, or .geojson format, you can upload it directly using the yellow box. If not, click the "Click here" link to send any design file to your Success Services engineer.



  2. Follow the instructions in the email. You should receive a zipped .shp file back within 8 working hours.



  3. Upload the .zip file Success Services returns using the interface above. The file will take approximately two minutes to process into tiles ready for viewing.

  4. View and analyze the overlaid CAD file along with any of your Jobs with a Project. You can now more accurately track progress, flag potential areas for rework, and minimize communication breakdown between subs and stakeholders.

 

 

 

Uploading design and engineering files to Site Scan Manager from 3D Robotics on Vimeo.

Comments